Solar Alternative Energy Credits (Pennsylvania)

This is the approved revision of this page, as well as being the most recent.
Jump to: navigation, search

Summary

Last modified on February 12, 2015.

Financial Incentive Program

Place Pennsylvania

Name Solar Alternative Energy Credits
Incentive Type Performance-Based Incentive
Applicable Sector Commercial, Industrial, Residential, Nonprofit, Schools, Local Government, State Government, Multi-Family Residential, Agricultural, Institutional
Eligible Technologies Photovoltaics
Active Incentive Yes

Implementing Sector State/Territory
Energy Category Renewable Energy Incentive Programs
Amount Varies based on market conditions; during 2014 the market price for PA-sourced SRECs has ranged from approximately 13 - 60/MWh (0.013 - 0.06/kWh) although individual trades have taken place at substantially lower and higher prices.




Eligible System Size No system size limitations

Equipment Requirements Systems generally require a utility-grade performance meter (exception exists for some facilities of 15 kW or smaller)








Maximum Incentive Varies based on market conditions; SACP does not represent a price ceiling because it is only determined after the fact










Program Administrator Clean Power Markets, Inc.
Website http://paaeps.com/credit/
Date added to DSIRE 2009-01-01
Last DSIRE Review 2014-12-04



References DSIREDatabase of State Incentives for Renewables and Efficiency[1]


Summary

Pennsylvania's Alternative Energy Portfolio Standard (AEPS), created by S.B. 1030 on November 30, 2004, requires each electric distribution company (EDC) and electric generation supplier (EGS) to retail electric customers in Pennsylvania to supply roughly 18% of its electricity using alternative-energy resources -- roughly 8% from Tier I technologies and 10% from Tier II technologies -- by 2021. The standard also contains a solar set-aside requiring obligated entities to procure a small percentage of their electricity sales from photovoltaic (PV) systems as part of the Tier I requirement. As with the other components of Pennsylvania's AEPS, the percentage requirement ramps up slowly over time. The obligation was set at 0.0120% for the compliance year running from June 2009 - May 2010, accelerating to an ultimate target of 0.5% in compliance year 2020-2021.

Under Pennsylvania law, a solar alternative energy credit (SAEC) represents proof that 1 megawatt-hour (MWh) of electricity was generated by a qualifying PV facility. In many other states the term "solar renewable energy certificate" or "SREC" is used to represent the functional equivalent (i.e., a means of compliance with a solar energy standard) of an SAEC in Pennsylvania. Electricity suppliers must purchase SAECs in order to meet their compliance obligations under the law, or pay a Solar Alternative Compliance Payment (SACP) for any shortfalls in SAEC purchases.

In Pennsylvania the SACP varies from year to year based largely on the market price of SAECs traded during the prior compliance year, thus it is only known after the end of a compliance year. The SACP is for a given year is calculated as 200% times the sum of (1) the market value of SAECs for the reporting period and (2) the levelized value of up-front rebates received by sellers of SAECs (see PUC order listed above for a more detailed description). For the 2011-2012 compliance year the SACP was $360.79, the largest part of which is attributable to the weighted average SAEC market price of $180.39 per SAEC for the period. The average market price for Pennsylvania-sourced credits for the year 2014 has ranged from roughly $13 - $60 per SAEC/SREC as tracked at SRECtrade, with significant variations above and below this average for individual transactions.*

Under this system SAECs represent a potentially significant source of revenue for owners of qualifying PV facilities with a value determined by demand in the trading market. Eligible generators in Pennsylvania, including on-site generators, retain ownership of SAECs generated by their system until they voluntarily transfer them to another party. A generator remains eligible to generate SAECs for as long as the facility remains certified as an eligible generator. An SAEC may generally be used for compliance by a utility for the compliance year during which it was generated or the two subsequent compliance years. However, SAECs purchased by a utility during a time period for which the utility is under rate caps -- rate caps for some utilities did not expire until January 1, 2011 -- may be used by the utility in the compliance year the rate caps are lifted or in the subsequent compliance year.

In order to begin producing SAECs that can be used for compliance with Pennsylvania's AEPS, a generator must apply for and be certified as an eligible generator. In order to be considered an eligible generator for the purpose of the AEPS, the generator must generally be located either within the state of Pennsylvania or within the broader PJM region. The exception to this rule is that energy from resources located within the footprint of the Midwest Independent Systems Operator (MISO) -- which also serves a small portion of Pennsylvania -- may be used for compliance in areas served by the MISO. The practical impact of this exception is that out-of-state resources located in the MISO may only be used for compliance by the Pennsylvania Power Co. or energy suppliers operating within its service territory.

Systems must be operational before the owner can apply for a certification number. Once a generator has received a certification number from the program administrator, they may create an account on the PJM-EIS Generation Attributes Tracking System (GATS). The GATS is used to track the generation and transfer of SAECs from an eligible facility. The GATS issues SAECs to correspond with energy generation readings that the system owner uploads to the system. Systems of 15 kilowatts (kW) or less that are not equipped with production meters may elect to use an engineering estimate of expected energy production in lieu of uploading actual meter readings into GATS.

Pennsylvania will only recognize the generation of SAECs by a system after the date of the application for certification. If the facility is located in another state that allows the use of energy production estimates for systems of 10 kW or less, the same estimates will be used in Pennsylvania, provided that the system meets the Pennsylvania requirements for allowing estimates.

The program website contains additional information on Pennsylvania's AEPS, registering a facility, and using credit brokers and aggregators.


*It is important to note that SAECs/SRECs produced by facilities located in Pennsylvania may be eligible for other compliance markets such as that in Ohio. The prices quoted here include transactions where Pennsylvania-sourced SAECs/SRECs have been sold into markets beyond Pennsylvania.


Incentive Contact

Contact Name Dina Deana
Department Clean Power Markets, Inc.

Address 511 Schoolhouse Rd, Suite 200

Place Kennett Township, Pennsylvania
Zip/Postal Code 19358
Phone (877) 237-7773


Email paaeps@cleanpowermarkets.com

     
     

Authorities (Please contact the if there are any file problems.)

Authority 1: 73 P.S. § 1648.1 et seq.
Date Effective 2006-06-01
Date Enacted 11/30/2004 (subsequently amended)


Authority 2: PUC Rulemaking Order Docket No. L-00060180
Date Effective 2008-11-22
Date Enacted 2008-09-25


















  • Incentive and policy data are reviewed and approved by the N.C. Solar Center's DSIRE project staff.[1]

References

  1. 1.0 1.1  "Database of State Incentives for Renewables and Efficiency"