NYSERDA - Enhanced Commercial/Industrial Performance Program (New York)

This is the approved revision of this page, as well as being the most recent.
Jump to: navigation, search

Summary

Last modified on October 6, 2012.

Financial Incentive Program

Place New York

Name NYSERDA - Enhanced Commercial/Industrial Performance Program
Incentive Type State Rebate Program
Applicable Sector Commercial, Industrial, Nonprofit, Schools, Local Government, State Government, Installer/Contractor, Multi-Family Residential, Agricultural, Institutional
Eligible Technologies Refrigerators, Lighting, Lighting Controls/Sensors, Heat pumps, Central Air conditioners, Motors, Motor VFDs, Custom/Others pending approval, CHP/Cogeneration, Commercial Clothes Washers, Commercial Kitchen Equipment, Gas Efficiency Equipment
Active Incentive No

Implementing Sector State/Territory
Energy Category Renewable Energy Incentive Programs, Energy Efficiency Incentive Programs
Amount Prescriptive rebates vary widely by equipment type and size (Tier I)

Custom Electric Efficiency Measures: 0.02/kWh saved (Tier II)
Custom Gas Efficiency Measures (ConEd): 1.50/therm saved (Tier II)
Custom Gas Efficiency Measures (National Fuel): 40/Mcf saved (Tier II)
Rebates to ESCOs vary by measure (Tier III)
Note: Gas efficiency incentives available only to certain ConEd and National Fuel gas customers









Expiration Date 06/30/2008 or when funds are fully committed, whichever comes first
06/30/2008 or when funds are fully committed, whichever comes first






Maximum Incentive Max Prescriptive incentive for non-Con Edison customers: 10,000 (I)

Max Prescriptive incentive for Con Edison customers: 25,000 (I)
Max Custom incentive for electric efficiency: 100,000 or 75% of project cost (II)
Max Custom incentive for gas efficiency (ConEd): 500,000 or 75% of project cost (II)
Max Custom incentive for gas efficiency (National Fuel): 25,000 or 50% of project cost (II)
An ESCO can receive no more than 5,000,000 for energy efficiency projects (III)
An ESCO may not collect more than 1,000,000 for a project or group of projects with a single customer (III)
Incentive may not exceed 30% of cost for Tier III projects





Program Budget $34.2 M for energy efficiency, of this $4 M for gas efficiency for ConEd customers and $1.2 M for Tier II improvements by National Fuel gas customers using less than 12,000 Mcf of gas per year;

$11.5 M for CHP






Program Administrator New York State Energy Research and Development Authority
Website http://www.nyserda.org/Programs/Commercial_Industrial/cipp.asp
Date added to DSIRE 2007-03-02
Last DSIRE Review 2008-03-27



References DSIRE[1]


Summary

The New York State Energy Research and Development Authority (NYSERDA) released PON 1101 on February 26, 2007, establishing a wide variety of incentives for energy efficiency through their Enhanced Commercial/Industrial Performance Program. This program offers three tiers of financial incentives for energy efficiency projects. The first tier (formerly Smart Equipment Choices) offers eligible customers financial incentives for the purchase and installation of pre-qualified electric and gas energy efficiency measures. The second tier offers eligible customers financial incentives for energy efficiency improvements based upon a technical engineering analysis. The third tier (formerly Commercial/Industrial Performance Program) offers performance-based incentives to contractors for energy efficiency projects in eligible utility service territories, and for CHP Systems in the Consolidated Edison Company of New York, Inc, electric service territory.

Tier I provides prescriptive rebates for a variety of pre-qualified equipment to be used in either new or existing commercial, industrial, institutional, agricultural, governmental and multifamily buildings. The rebates are limited to a maximum of $10,000 for electric equipment and $25,000 for gas equipment.

Tier II offers rebates on for custom measures based upon kilowatt-hours (kWh) saved or therms saved for the installation of energy efficiency measures after performing a technical engineering analysis of the electric or gas energy savings of the efficiency project as determined by NYSERDA. The rebate amount is $0.02 per kWh saved for electric efficiency measures, capped at $100,000 or 75% of project cost. ConEd natural gas customers can recieve a rebate of $1.50 per therm saved, capped at $500,000 or 75% of project cost. National Fuel gas customers with an annual demand of 12,000 Mcf or less are eligible for a rebate of $40 per Mcf saved, capped at $25,000 or 50% of the project cost.

Tier III awards performance-based incentives to Energy Service Companies (ESCOs) for implementing cost-effective energy efficiency measures and CHP systems that deliver verifiable energy and demand savings through measurement and verification. The incentive provided for gas efficiency measures is $2.00 per therm saved, and electric efficiency measures can yield between $0.05 and $0.20 per kWh saved, depending on the type of equipment. Bonus incentives are provided to Con Edison customers who reduce the summer on-peak demand through an efficiency measure or CHP.

See the program website and corresponding applications and manuals for complete details and restrictions. As of July 30, 2007, $33 million remained for energy efficiency improvements, and $11.5 million remained for CHP.


Incentive Contact

Contact Name Eric Mazzone
Department New York State Energy Research and Development Authority

Address 17 Columbia Circle

Place Albany, New York
Zip/Postal Code 12203-6399
Phone (866) 697-3732 Ext:3371
Phone 2 (518) 862-1090

Email efm@nyserda.org
Website http://www.nyserda.org/
     
     

  • Incentive and policy data are reviewed and approved by the N.C. Solar Center's DSIRE project staff.[1]

References

  1. 1.0 1.1  "Database of State Incentives for Renewables and Efficiency (DSIRE)"