Inland Power & Light Company - Agricultural Energy Efficiency Rebate Programs (Washington)

This is the approved revision of this page, as well as being the most recent.
Jump to: navigation, search


Last modified on February 12, 2015.

Financial Incentive Program

Place Washington

Name Inland Power and Light Company - Agricultural Energy Efficiency Rebate Programs
Incentive Type Utility Rebate Program
Applicable Sector Agricultural
Eligible Technologies Agricultural Equipment, Custom/Others pending approval, Motor VFDs, Motors, Sprinklers, Nozzles, Gaskets, Drains, Regulators, Hubs, Drop Tubes
Active Incentive Yes

Implementing Sector Utility
Energy Category Energy Efficiency Incentive Programs
Amount Flow controlling type nozzle for impact sprinklers: $4

Rebuilt or New Impact Sprinklers: $3.75
Nozzle for Impact Sprinkler: $1.50
Rotating Type Sprinklers: $4
Gasket: $2.75
Low-Pressure Regulators: $5
Low-Pressure Sprinklers: $4
Multiple Configuration Nozzles: $3
Multi-Trajectory Sprays: $4
Drains for Lines: $1
Hubs for Wheel-Lines: $14.50
"Goose Neck" Elbow for New Drop Tubes: $1.65
Drop Tubes: $3
Center Pivot Base Boot Gasket: $175
Line Repairs: $10/section
Wheel-Line Leveler: $0.75
Irrigation System Motors: $55 - $5,600
Medium Voltage Irrigation System Motors: $2,385 - $4,174
VFDs on Small Milking Machines: $2,200
Custom: $0.15/kWh

Equipment Requirements All equipment must be new

Motors: must be three-phase AC induction; 5 to 500 horsepower; and NEMA design A, B, or C

Maximum Incentive Custom: 70% or project cost

Program Administrator Inland Power and Light Company
Date added to DSIRE 2009-04-10
Last DSIRE Review 2012-07-24

References DSIRE[1]


Inland Power offers a variety of incentives for agricultural/irrigation customers to save energy on participating farms. Rebates are available for a variety of sprinkler equipment (nozzles, gaskets, regulators, sprays, drains, hubs, etc), irrigation motor replacements, and variable frequency drives for small milking machines. Specific equipment requirements and rebate amounts, as well as a rebate calculator form and application form, are located on the program web site. Inland Power also offers a custom rebate of up to $0.15 per kWh, not to exceed 70% of project cost, for other agricultural measures not included in the prescriptive rebate program. Custom projects must be submitted to Inland for review and have BPA approval before the purchase of the equipment and installation.

Incentive Contact

Contact Name Dan Villalobos
Department Inland Power and Light Company

Address 320 E. Second Ave.

Place Spokane, Washington
Zip/Postal Code 99202
Phone (509) 747-7151
Phone 2 (800) 747-7151


  • Incentive and policy data are reviewed and approved by the N.C. Solar Center's DSIRE project staff.[1]


  1. 1.0 1.1  "Database of State Incentives for Renewables and Efficiency (DSIRE)"