Injectivity Test At Reese River Area (Henkle & Ronne, 2008)
Exploration Activity: Injectivity Test At Reese River Area (Henkle & Ronne, 2008)
|Exploration Activity Details|
|Location||Reese River Area|
|Exploration Technique||Injectivity Test|
On March 22, 2007 a brief injectivity test was preformed after the slotted liner had been installed. Water was injected at flow rates of 6.3 l/s, 13 l/s and 19 l/s and the pressure and temperature was recorded down hole at a depth of 926 m. At the higher flow rate, the test was interrupted several times to repair leaks at the surface. From the recorded pressure an approximate injectivity index of 10 l/s/MPa was calculated.
- William R. Henkle, Joel Ronne (2008) Phase 2 Reese River Geothermal Project Slim Well 56-4 Drilling And Testing