Energy Efficiency Standard (Illinois)
(Redirected from Illinois Energy Efficiency Standard (Illinois))
Last modified on February 12, 2015.
Rules Regulations Policies Program
|Name||Energy Efficiency Standard|
|Incentive Type||Energy Efficiency Resource Standard|
|Applicable Sector||Investor-Owned Utility, Retail Supplier, Illinois DCEO|
|Eligible Technologies||Custom/Others pending approval, Others pending approval, Electricity and Natural Gas Reduction Technologies|
|Energy Category|| Energy Efficiency Incentive Programs
|Electric Peak Demand Reduction||0.1% reduction in peak demand each year for 10 years (EY 2009-2019)|
|Electric Sales Reduction||0.2% of energy delivered in EY 2009, increasing to 2% of energy delivered in EY 2016 and thereafter|
|Natural Gas Sales Reduction|| 7.1% total savings by EY 2019|
Additional 1.5% savings each year thereafter
|Rate Impact Parameters|| Measures must satisfy the Total Resource Cost (TRC) Test
|Date added to DSIRE||2010-12-15|
|Last DSIRE Review||2012-08-16|
| Last Substantive Modification
to Summary by DSIRE
The 2007 Illinois Power Agency Act (IPAA) requires both electric and natural gas utilities establish annual energy-savings goals and reduce energy delivered and peak demand. Utilities are required to file an energy efficiency and demand-response plan with the Illinois Commerce Commission (ICC) every three years, beginning in 2007.
Electric Utility Compliance
Electricity Sales Reduction
The electricity reduction goals apply to utilities that had 100,000 or more customers on December 31, 2005. In February 2008, the ICC approved utility implementation plans for these requirements, available in Dockets 07-0539(Ameren) and 07-0540(ComEd). The IPAA established an electricity savings goal of incremental annual sales reduction over the previous year's consumption rate with a goal for 2015 of 2.0% reduction of 2014 electricity sales. Each year's benchmark is thus set by the preceding year's energy consumption, commencing on June 1 of that year. The electricity sales reduction percentage holds at 2.0% for every year thereafter. Utilities are responsible for implementing 75% of the energy efficiency measures approved by the ICC, and the Department of Commerce and Economic Opportunity (DCEO) is responsible for 25% of the savings using by administering public programs through the Energy Efficiency Portfolio Standards (EEPS) Fund. Utilities are responsible for collecting funds for measures implemented by the DCEO and transferring those funds directly to the DCEO.
|Energy Year||Electric Sales Reduction|
Peak Demand Reduction
Electric utilities shall implement cost-effective demand-response measures to reduce peak demand by 0.1% over the prior year for eligible retail customers. Commencing on June 1, 2008, this requirement continues for 10 years. Utilities are responsible for 100% of the demand-response measures.
Natural Gas Utility Compliance
|Energy Year||Natural Gas Incremental Sales Reduction||Total Natural Gas Savings|
For both natural gas and electric utilities, failure to submit an energy reduction plan will result in a fine of $100,000 for each day until the plan is filed. This penalty is deposited in the Energy Efficiency Trust Fund and may not be recovered by rate payers. Plans are due on September 1 every three years. If an electric utility fails to comply with its plan after 2 years, it must make a contribution to the Low-Income Home Energy Assistance Program (LIHEAP). Large utilities (those with more than 2,000,000 customers on December 31, 2005) must contribute $665,000, and medium utilities (those with between 100,000 and 2,000,000 customers) must contribute $335,000. Utilities that fail to meet their plans again after the third year must make another contribution to the fund ($665,000 for large utilities and $335,000 for medium utilities). After three years of non-compliance, the Illinois Power Agency (IPA) shall assume control over energy efficiency incentive programs. For natural gas utilities that fail to meet their efficiency plans after three years, large utilities (those with more than 1,500,000 customers on December 31, 2008) must pay $600,000 into LIHEAP, medium utilities (those with 500,000-1,500,000 customers on December 31, 2008) must pay $400,000, and small utilities (those with 100,000-500,000 customers on December 31, 2008) must pay $200,000. If a utility fails to meet the standard for 2 consecutive 3-year planning periods, the ICC will transfer responsibility of the utility's energy efficiency programs to an independent administrator.
Rate Impact Cap
Energy efficiency measures must satisfy the Total Resource Cost (TRC) Test. In addition, in 2008 through 2011, annual per kilowatt-hour charges are limited based on the previous year's rates. Beginning in 2012, the estimated average net increase due to the cost of efficiency measures to 2.015% of the amount paid per kWh by customers in EY 2007 or the incremental amount per kWh paid for the measures in 2011, whichever is greater.
*The term EY refers to compliance period or “energy year” for the standard, which runs from June - May and is defined by the year in which an energy year ends.
Authorities (Please contact the if there are any file problems.)
|Authority 1:|| § 220 ILCS 5/8-103
|Authority 2:|| § 220 ILCS 5/8-104
|Authority 3:||Public Act 097-0616|
|Date Enacted|| 2011-10-31
|Authority 4:||Public Act 097-0841|
|Date Enacted|| 2012-07-20
- Incentive and policy data are reviewed and approved by the N.C. Solar Center's DSIRE project staff.