Idaho Power - New Building Efficiency Program (Idaho)
This is the approved revision of this page, as well as being the most recent.
Last modified on February 12, 2015.
Financial Incentive Program
|Name||Idaho Power - New Building Efficiency Program|
|Incentive Type||Utility Rebate Program|
|Applicable Sector||Commercial, Industrial|
|Eligible Technologies||Central Air conditioners, Comprehensive Measures/Whole Building, Energy Mgmt. Systems/Building Controls, Heat pumps, Lighting, Lighting Controls/Sensors, Motor VFDs, Windows|
|Energy Category||Energy Efficiency Incentive Programs|
|Amount|| FlexPeak Management: Enroll through EnerNOC|
Exterior Lighting Load Reduction: $200/kW below code
|Equipment Requirements|| Lighting: system designs that are at least 15% - 20% better than code minimum.|
Reflective Roof Treatment: total initial solar reflectivity of at least 0.70 and an emissivity of 0.75 or more. Product or coating must be in buildings with central air conditioning and with roofs pitched less than 4 in 12.
|Funding Source||Conservation Charge|
|Installation Requirements|| Pre-applications required|
Daylighting plans need to be reviewed by Idaho Design Lab (IDL).
|Maximum Incentive||$100,000 per project (regardless of size)|
|Program Administrator||Idaho Power Company|
|Date added to DSIRE||2006-06-22|
|Last DSIRE Review||2012-10-17|
| Last Substantive Modification
to Summary by DSIRE
Idaho Power offers incentives for its commercial and industrial customers in Idaho and Oregon to install new equipment above code in participating facilities. They provide rebates for lighting controls, HVAC equipment and controls, building shell measures, and energy control/ventilation equipment. Incentives are designed to average about half the additional cost of energy-efficiency investments. This program is for Idaho Power commercial or industrial customers on rate Schedule 7 (Small General Service, Small Commercial), Schedule 9 (Large General Service, Large Commercial), or Schedule 19 (Large Power Service). Only projects that are part of a new building, an expansion to an existing building, or a major renovation can qualify. All Building Efficiency final applications must be submitted within 60 days of project completion. Extensive program details can be found on the program web site.
|Contact Name||Customer Service - Idaho Power|
|Department||Idaho Power Company|
|Address||P.O. Box 70|
|Address 2||1221 W. Idaho St.|
|Phone 2||(800) 488-6151|
- Incentive and policy data are reviewed and approved by the N.C. Solar Center's DSIRE project staff.