High Performance Building Standards in State Buildings (Oklahoma)

This is the approved revision of this page, as well as being the most recent.
Jump to: navigation, search


Last modified on February 12, 2015.

Rules Regulations Policies Program

Place Oklahoma

Name High Performance Building Standards in State Buildings
Incentive Type Energy Standards for Public Buildings
Applicable Sector State Government
Eligible Technologies Comprehensive Measures/Whole Building, Biomass, CHP/Cogeneration, Daylighting, Geothermal Heat Pumps, Passive Solar Space Heat, Photovoltaics, Small Hydroelectric, Solar Space Heat, Solar Water Heat, Wind
Active Incentive Yes

Implementing Sector State/Territory
Energy Category Energy Efficiency Incentive Programs, Renewable Energy Incentive Programs
























Requirement State construction or renovations of buildings larger than 10,000 square feet must meet LEED or Green Globes certification standards.




















Website http://www.ok.gov/DCS/Facilities_Services/Sustainability/index.html
Date added to DSIRE 2008-07-28
Last DSIRE Review 2012-07-16



References DSIRE[1]


Summary

In June 2008, the governor of Oklahoma signed HB 3394 requiring the state to develop a high-performance building certification program for state construction and renovation projects. The standard, which will be developed by the Oklahoma Department of Central Services (DCS), must be meet the certification guidelines of either the U.S. Green Building Council's (USGBC) LEED system or the Green Building Initiative's Green Globes rating system.

The requirement applies to new construction or substantial renovation projects that begin the design phase after July 1, 2008 in buildings larger than 10,000 square feet. Substantial renovations are defined as projects that cost in excess of 50% of the value of the facility. Buildings with less than 5,000 square feet may be held to the standards of the high-performance certification program when completing minor renovations and controlled maintenance. In order to be considered a state project for the purposes of the standard, state funds or state-insured funds must constitute at least 50% of the project cost. State agencies are directed to meet the highest level of certification attainable under a payback period of 5 years or less.

The law specifically exempts public schools and state archive buildings from the requirement, as well as buildings that do not contain heating, ventilation, or air conditioning system. In cases where the increased initial cost of achieving certification is expected to be greater than 5%, the design must be examined by the DCS prior to being approved. The DCS also has general discretionary authority to grant exemptions for other extenuating circumstances.

As of July, 2012, the EPA named eight Oklahoma state buildings as Energy Star buildings, including the Department of Agriculture, Attorney General, Department of Transportation, Allen Wright Memorial Library, DHS-CAP, State Capitol, Jim Thorpe and the Kerr-Edmondson buildings. More information can be found within the FY2011 Sustainability Performance Review.


Incentive Contact

Contact Name John Morrison
Department Oklahoma Department of Central Services
Division Construction and Properties
Address 2401 N. Lincoln, Suite 106
Address 2 P. O. Box 53448
Place Oklahoma City, Oklahoma
Zip/Postal Code 73152-3448
Phone (405) 521-2112



Website http://www.ok.gov/DCS/Construction_&_Properties/index.html
     
     

Authorities (Please contact the if there are any file problems.)

Authority 1: 61 Okl. St. § 213
Date Effective 2009-08-21
Date Enacted 2008-06-03


















  • Incentive and policy data are reviewed and approved by the N.C. Solar Center's DSIRE project staff.[1]

References

  1. 1.0 1.1  "Database of State Incentives for Renewables and Efficiency (DSIRE)"