Distributed Generation Standard Contracts (Rhode Island)
Last modified on February 12, 2015.
Financial Incentive Program
|Name||Distributed Generation Standard Contracts|
|Incentive Type||Performance-Based Incentive|
|Applicable Sector||Commercial, Industrial, Residential, Nonprofit, Schools, Local Government, State Government, Fed. Government, Multi-Family Residential, Agricultural, Institutional|
|Eligible Technologies||Solar Thermal Electric, Photovoltaics, Landfill Gas, Wind, Biomass, Hydroelectric, Geothermal Electric, Anaerobic Digestion, Small Hydroelectric, Ocean Thermal, Fuel Cells using Renewable Fuels|
|Energy Category||Renewable Energy Incentive Programs|
|Amount|| 2014 Ceiling Rates |
PV (50-200 kW): 25.75 cents/kWh
|Eligible System Size||Varies by enrollment period; maximum statutory system size is 3 MW, minimum statutory system size is 50 kW|
|Maximum Incentive||Higher incentives are provided for systems not including Bonus Depreciation, and for systems not including federal tax incentives|
|Ownership of Renewable Energy Credits||Projects must register with NEPOOL-GIS and designate National Grid to receive all RECs|
|Terms||15-year standard contract with fixed payment rate|
|Program Administrator||Distributed Generation Standard Contract Board|
|Date added to DSIRE||2011-09-16|
|Last DSIRE Review||2014-12-02|
|References||DSIREDatabase of State Incentives for Renewables and Efficiency|
NOTE: The third enrollment period for standard contracts for 2014 closed on November 7.
Rhode Island enacted legislation (H.B. 6104) in June 2011 establishing a feed-in tariff for new distributed renewable energy generators up to three megawatts (MW) in capacity. The law requires electric distribution companies to enter into standard contracts for an aggregate capacity of at least 40 MW by the end of 2014. Standard contracts include a fixed payment rate and a 15-year term, and generally vary by generator capacity and type.
Eligible renewables include solar energy, wind energy, ocean-thermal energy, geothermal energy, small hydropower, biomass facilities that maintain compliance with current air permits,* and fuel cells using renewable resources. Separate classes have been established for “large” generators and “small” generators. Small generators include solar energy systems between 50 kilowatts (kW) and 500 kW, and wind energy systems between 50 kW and 1.5 MW. The Distributed Generation Standard Contract Board will determine capacity limits for other “small” systems, but limits may not exceed 1 MW. (The Board is authorized to modify this program in several ways, as specified in the authorizing legislation.) Payment rates vary by system size and type.
The contracting period is spread over four years. The following annual minimum targets for standard contracts have been established:
- By December 30, 2011: 5 MW of aggregate capacity
- By December 30, 2012: 20 MW of aggregate capacity
- By December 30, 2013: 30 MW of aggregate capacity
- By December 30, 2014: 40 MW of aggregate capacity
The Board must set ceiling prices by October 15 for the following calendar year. Each electric distribution company must conduct one standard contract enrollment period in 2011 and at least three enrollment periods in subsequent program years. Each enrollment period will be open for two weeks.
Eligible small and large projects will be assessed separately, and projects from each class will be awarded standard contracts based on the lowest proposed prices received. Eligible systems that are net-metered may apply to sell excess output.
* Waste-to-energy combustion systems are explicitly excluded.
|Contact Name||Public Information - SEO|
|Department||Rhode Island Office of Energy Resources|
|Address||One Capitol Hill|
|Place||Providence, Rhode Island|
Authorities (Please contact the if there are any file problems.)
|Authority 1:||R.I. Gen. Laws § 39-26.2-1 et seq.|
|Authority 2:||HB 5803|
- Incentive and policy data are reviewed and approved by the N.C. Solar Center's DSIRE project staff.