Definition:DIY battery

Jump to: navigation, search
File:Lemon Battery With LED.svg
Diagram showing three lemon cells wired together so that they energize the red light emitting diode (LED) at the top. Each individual lemon has a zinc electrode and a copper electrode inserted into it; the zinc is colored gray in the diagram. The slender lines drawn between the electrodes and the LED represent the wires.

A diy battery is a simple type of battery that is commonly made for school science and homemade projects.

Lemon battery illustrates a battery's main components. Typically, a piece of zinc metal and a piece of copper metal are inserted into a lemon. Everyday objects such as galvanized nails and copper pennies can be used for the zinc and for the copper. A single lemon is usually studied using an electrical multimeter. Several lemons can be wired together to form a more powerful battery that will power a light-emitting diode, a buzzer, or a digital clock.[1][2][3][4]

The lemon battery is similar to the first electrical battery invented in 1800 by Alessandro Volta, who used brine (salt water) instead of lemon juice.[5] The lemon battery is described in some textbooks in order to illustrate the type of chemical reaction (oxidation-reduction) that occurs in batteries.[6][7][8] The zinc and copper are called the electrodes, and the juice inside the lemon is called the electrolyte. There are many variations of the lemon cell that use different fruits (or liquids) as electrolytes and metals other than zinc and copper as electrodes.


Use in school projects

There are numerous sets of instructions for making lemon batteries and for obtaining components such as light-emitting diodes (LEDs), electrical meters (multimeters), and zinc-coated (galvanized) nails and screws.[2][3] Commercial "potato clock" science kits include electrodes and a low-voltage digital clock. After one cell is assembled, a multimeter can be used to measure the voltage or the electrical current from the voltaic cell; a typical voltage is 0.9 V with lemons. Currents are more variable, but range up to about 1 mA. For a more visible effect, lemon cells can be connected in series to power an LED (see illustration) or other devices. The series connection increases the voltage available to devices. Swartling and Morgan have published a list of low-voltage devices along with the corresponding number of lemon cells that were needed to power them; they included LEDs, piezeoelectric buzzers, and small digital clocks. With the zinc/copper electrodes, at least two lemon cells were needed for any of these devices.[4] Substituting a magnesium electrode for the zinc electrode makes a cell with a larger voltage (1.5−1.6 V), and a single magnesium/copper cell will power some devices.[4] Note that incandescent light bulbs from flashlights are not used because the lemon battery is not designed to produce enough electrical current to light them. By multiplying the average amps of a lemon (0.001A/ 1mA) by the average (lowest) volts of a lemon (0.7V) we can conclude that it would take approximately 6,171,430 lemons to give us the power of an average 4320W car battery.


Potato battery with zinc (left) and copper electrodes. The zinc electrode is a galvanized machine screw. The copper electrode is a wire. Note the labels − and + marked on the potato indicating that the copper electrode is the positive terminal of the battery. A short screw and nut connect the electrodes to the copper wires that have black and red insulating plastic coatings.

Many fruits and liquids can be used for the acidic electrolyte. Fruit is convenient, because it provides both the electrolyte and a simple way to support the electrodes. The acid involved in citrus fruits (lemons, oranges, grapefruits, etc.) is citric acid. The acidity, which is measured by the pH, varies substantially.

Potatoes have phosphoric acid, and work well; they are the basis for commercial "potato clock" kits.[9][10] Potato batteries with LED lighting have been proposed for use in poor countries or by off-grid populations. International research begun in 2010 showed that boiling potatoes for eight minutes improves their electrical output, as does placing slices of potatoes between multiple copper and zinc plates. Boiled and chopped plantain pith (stem) is also suitable, according to Sri Lankan researchers.[11]

Instead of fruit, liquids in various containers can be used. Household vinegar (acetic acid) works well.[12] Sauerkraut (lactic acid) was featured in one episode of the US television program Head Rush (an offshoot of the MythBusters program). The sauerkraut had been canned, and became the electrolyte while the can itself was one of the electrodes.[13]

Zinc and copper electrodes are reasonably safe and easy to obtain. Other metals such as lead, iron, magnesium, etc., can be studied as well; they yield different voltages than the zinc/copper pair. In particular, magnesium/copper cells can generate voltages as large as 1.6 V in lemon cells. This voltage is larger than obtainable using zinc/copper cells. It is comparable to that of standard household batteries (1.5 V), which is useful in powering devices with a single cell instead of using cells in series.[4]

Learning outcomes

For the youngest pupils, about ages 5–9, the educational goal is utilitarian:[14] batteries are devices that can power other devices. Batteries are components in electrical circuits; hooking a single wire between a battery and a light bulb will not power the bulb.

For children in the age range 10−13, batteries are used to illustrate the connection between chemistry and electricity as well as to deepen the circuit concept for electricity.[14] The fact that different chemical elements such as copper and zinc are used can be placed in the larger context that the elements do not disappear or break down when they undergo chemical reactions.

For older pupils and for college students, batteries serve to illustrate the principles of oxidation-reduction reactions.[14][15] Students can discover that two identical electrodes yield no voltage, and that different pairs of metals (beyond copper and zinc) yield different voltages. The voltages and currents from series and parallel combinations of the batteries can be examined.[1]

The current that is output by the battery through a meter will depend on the size of the electrodes, how far the electrodes are inserted into the fruit, and how close to each other the electrodes are placed; the voltage is fairly independent of these details of the electrodes.[16]

Chemical reactions

Cross-section of a copper/zinc cell with a sulfuric acid electrolyte. The drawing illustrates the atomic model for the chemical reactions; lemon cells have essentially the same model. Zinc atoms enter the electrolyte as ions missing two electrons (Zn++). Two negatively charged electrons from the dissolved zinc atom are left in the zinc metal. Two of the dissolved protons (H+) in the acidic electrolyte combine with each other and two electrons to form molecular hydrogen H2, which bubbles off of the copper electrode. The electrons lost to the copper are made up by moving two electrons from the zinc through the external wire.

Most textbooks present the following model for the chemical reactions of a lemon battery.[5][7][17] When the cell is providing an electrical current through an external circuit, the metallic zinc at the surface of the zinc electrode is dissolving into the solution. Zinc atoms dissolve into the liquid electrolyte as electrically charged ions (Zn2+), leaving 2 negatively charged electrons (e-) behind in the metal:

Zn → Zn2+ + 2e- .

This reaction is called oxidation. While zinc is entering the electrolyte, two positively charged hydrogen ions (H+) from the electrolyte combine with two electrons at the copper electrode's surface and form an uncharged hydrogen molecule (H2):

2H++ 2e- → H2 .

This reaction is called reduction. The electrons used from the copper to form the molecules of hydrogen are transferred by an external wire connected to the zinc. The hydrogen molecules formed on the surface of the copper by the reduction reaction ultimately bubble away as hydrogen gas.

Experimental results

This model of the chemical reactions makes several predictions that were examined in experiments published by Jerry Goodisman in 2001. Goodisman notes that numerous recent authors propose chemical reactions for the lemon battery that involve dissolution of the copper electrode into the electrolyte. Goodisman excludes this reaction as being inconsistent with the experiments, and notes that the correct chemistry, which involves the evolution of hydrogen at the copper electrode, has been known for many years.[8] Most of the detailed predictions of the model apply to the battery's voltage that is measured directly by a meter; nothing else is connected to the battery. When the electrolyte was modified by adding zinc sulfate (ZnSO4), the voltage from the cell was reduced as predicted using the Nernst equation for the model. The Nernst equation essentially says how much the voltage drops as more zinc sulfate is added. The addition of copper sulfate (CuSO4) did not affect the voltage. This result is consistent with the fact that copper atoms from the electrode are not involved in the chemical reaction model for the cell.

When the battery is hooked up to an external circuit and a significant electrical current is flowing, the zinc electrode loses mass, as predicted by the zinc oxidation reaction above. Similarly, hydrogen gas evolves as bubbles from the copper electrode. Finally, the voltage from the cell depended upon the acidity of the electrolyte, as measured by its pH; decreasing acidity (and increasing pH) causes the voltage to fall. This effect is also predicted by the Nernst equation; the particular acid that was used (citric, hydrochloric, sulfuric, etc.) doesn't affect the voltage except through the pH value.

The Nernst equation prediction failed for strongly acid electrolytes (pH < 3.4), when the zinc electrode dissolves into the electrolyte even when the battery is not providing any current to a circuit. The two oxidation-reduction reactions listed above only occur when electrical charge can be transported through the external circuit. The additional, open-circuit reaction can be observed by the formation of bubbles at the zinc electrode under open-circuit. This effect ultimately limited the voltage of the cells to 1.0 V near room temperature at the highest levels of acidity.

Energy source

The energy comes from the chemical change in the zinc (or other metal) when it dissolves into the acid. The energy does not come from the lemon or potato. The zinc is oxidized inside the lemon, exchanging some of its electrons with the acid in order to reach a lower energy state, and the energy released provides the power.[8]

In current practice, zinc is produced by electrowinning of zinc sulfate or pyrometallurgic reduction of zinc with carbon, which requires an energy input. The energy produced in the lemon battery comes from reversing this reaction, recovering some of the energy input during the zinc production.

Smee cell

From 1840 to the late 19th century, large voltaic cells using a zinc electrode and a sulfuric acid electrolyte were widely used in the printing industry. While copper electrodes like those in lemon batteries were sometimes used, in 1840 Alfred Smee invented a refined version of this cell that used silver with a rough platinum coating instead of a copper electrode.[18][19] Hydrogen gas clinging to the surface of a silver or copper electrode reduces the electrical current that can be drawn from a cell; the phenomenon is called "polarization".[17][20] The roughened, "platinized" surface speeds up the bubbling of the hydrogen gas, and increases the current from the cell. Unlike the zinc electrode, the copper or platinized silver electrodes are not consumed by using the battery, and the details of this electrode do not affect the cell's voltage. The Smee cell was convenient for electrotyping, which produced copper plates for letterpress printing of newspapers and books, and also statues and other metallic objects.[19][21][22][23][24]

The Smee cell used amalgamated zinc instead of pure zinc; the surface of amalgamated zinc has been treated with mercury.[23] Apparently amalgamated zinc was less prone to degradation by an acidic solution than is pure zinc.[25] Amalgamated zinc and plain zinc electrodes give essentially the same voltage when the zinc is pure.[26] With the imperfectly refined zinc in 19th century laboratories they typically gave different voltages.[25]

In popular culture

In the video game Portal 2, antagonist GLaDOS's A.I. was embedded into a potato-battery-run computer.

In the NCIS Season 7 episode "Power Down", forensic technician Abby Sciuto uses lemons to power her stereo.

In The Big Bang Theory Season 6 episode "The Proton Resurgence", Leonard and Sheldon's childhood hero Professor Proton (Bob Newhart) attempts to show the group a potato battery, which amazes Penny.

In the Bones Season 6 episode "The Blackout in the Blizzard", Angela and the other "squints" build a massive potato battery array in an attempt to power a cell phone. Illustrating the pathetically low output of such a system, it is successful for only a handful of seconds while using dozens of potatoes.

In the episode "Lemons" of the television program Red Dwarf (tenth series (Series X)), the crew travel 4,000 miles from Britain to India in 23 AD in order to get lemons to build a lemon battery to power up their time machine's returner remote.

In the sixth episode of the final season of Mystery Science Theater 3000, the main villan Pearl Forrester tried taking over the world using potato batteries, only for her plans to be ruined by Professor Bobo.

See also


  1. Cite error: Invalid <ref> tag; no text was provided for refs named Sorey
  2. Cite error: Invalid <ref> tag; no text was provided for refs named HILA
  3. Cite error: Invalid <ref> tag; no text was provided for refs named How
  4. Cite error: Invalid <ref> tag; no text was provided for refs named Swartling
  5. Cite error: Invalid <ref> tag; no text was provided for refs named Decker
  6. Cite error: Invalid <ref> tag; no text was provided for refs named Snyder
  7. Cite error: Invalid <ref> tag; no text was provided for refs named Oon
  8. Cite error: Invalid <ref> tag; no text was provided for refs named Goodisman
  9.  "Potato Battery"
  10. Template:Cite book
  11.  BBC - Future - Technology. "Potato power: the spuds that could light the world"
  12. Cite error: Invalid <ref> tag; no text was provided for refs named Heeling
  13. Template:Cite video Sauerkraut is quite acidic due to the lactic acid produced during fermentation. The sauerkraut clock powers a digital thermometer in this video.
  14. Cite error: Invalid <ref> tag; no text was provided for refs named Abraham
  15. Cite error: Invalid <ref> tag; no text was provided for refs named Schmidt
  16. Cite error: Invalid <ref> tag; no text was provided for refs named Du
  17. Cite error: Invalid <ref> tag; no text was provided for refs named Naidu
  18. Cite error: Invalid <ref> tag; no text was provided for refs named Magazine
  19. Cite error: Invalid <ref> tag; no text was provided for refs named Bottone
  20. Cite error: Invalid <ref> tag; no text was provided for refs named Watt
  21. Cite error: Invalid <ref> tag; no text was provided for refs named Gordon
  22. Cite error: Invalid <ref> tag; no text was provided for refs named Hatch
  23. Cite error: Invalid <ref> tag; no text was provided for refs named Sprague
  24. Cite error: Invalid <ref> tag; no text was provided for refs named Scott
  25. Cite error: Invalid <ref> tag; no text was provided for refs named Park
  26. The standard electrode potential is 0.76 V for both pure zinc and for amalgamated zinc. See Template:Cite book.


Further reading

  •  "Maglab - Simple Electrical Cell Tutorial" Description of an acid cell with zinc & copper electrodes, including a JAVA-based animation. The animation shows zinc dissolving into the electrolyte, electrons flowing from the zinc to the copper electrodes, and little hydrogen bubbles coming off the copper electrode. The animation also suggests that a single cell can light an LED, which is not possible for LEDs that emit visible light.
  • Template:Cite book Online preview only.

External links