Dayton Power and Light - Business and Government Energy Efficiency Rebate Program (Ohio)

This is the approved revision of this page, as well as being the most recent.
Jump to: navigation, search

Summary

Last modified on February 12, 2015.

Financial Incentive Program

Place Ohio

Name Dayton Power and Light - Business and Government Energy Efficiency Rebate Program
Incentive Type Utility Rebate Program
Applicable Sector Agricultural, Commercial, Fed. Government, Industrial, Institutional, Local Government, Nonprofit, Schools, State Government, Tribal Government
Eligible Technologies Central Air conditioners, Chillers, Clothes Washers, Compressed air, Custom/Others pending approval, Energy Mgmt. Systems/Building Controls, Heat pumps, Lighting, Lighting Controls/Sensors, Motor VFDs, Motors, Processing and Manufacturing Equipment, Programmable Thermostats, Water Heaters, LED Exit Signs, Geothermal Heat Pumps, Barrel Wraps, Energy Audit, Air Economizers
Active Incentive Yes

Implementing Sector Utility
Energy Category Energy Efficiency Incentive Programs, Renewable Energy Incentive Programs
Amount Custom Lighting: $0.05/kWh saved + $50/kW saved

Custom Heating, Ventilation and Air Conditioning: $0.10/kWh saved + $100/kW saved
Custom Other: $0.08/kWh saved + $100/kW saved
New Construction Rebates: Custom
Government Energy Audit: Free
Energy Star Commercial Clothes Washer and Electric Dryer: $50/unit
Barrel Wraps (for injection molding and extruding applications): $1.00/ton

HVAC
Packaged Terminal Air Conditioning and Heat Pumps: $50
Unitary/Split System Air Conditioning: $40/ton ($200/unit for units < 65,000 BTUH)
Air Source Heat Pumps: $40/ton ($400/unit for units < 65,000 BTUH)
Water-Source Heat Pumps: $40/ton
Ground Water-Source Heat Pumps (Open Loop): $80/ton
Ground-Coupled Heat Pumps (Closed Loop): $60/ton
Air Cooled Chillers: $40/ton
Water Cooled Chillers: $40/ton
Heat Pump Water Heaters: $1,000 - $2,500
Thermal Storage: $100/KW shifted
Outside air economizer: $250
Energy recovery ventilation: $1/CFM
HVAC occupancy sensor: $30
Window Film: $2/sq ft

Motors
Variable Frequency Drives: $40/HP (up to 250 HP)
Motors: $10/hp-$25/hp
Air Compressors: $45/hp or $125/hp
Engineered Nozzle: $20

Lighting
Fluorescent Lighting: $4-$14/fixture
High-Bay and High Output Lighting Replacing HID: $25-$80/fixture
CFL lighting: $1.50/bulb (<32 watts) or $4/bulb (>32 watts)
Delamping: $1.20-$1.50/ln. ft. or $0.05/rated fixture watt
Relamping: $1 - $1.25
Lighting Sensors: $15-$60/sensor, $0.04/connected watt for controls
LED Signs and Signals: $10-$50/sign
LED Exterior Lighting: $50-$200/fixture
LED Case Lighting: $50/door
LED Case Lighting Sensors: $10/sensor
LED Recessed Downlights: $10/lamp
Light Tube: $35







Equipment Requirements Packaged Terminal Air Conditioning and Heat Pumps: 12.8 EER minimum

Unitary and Split System Air Conditioning: systems < 65,000 BTUH must be over 14 SEER; 11-9.7 EER for all larger systems
Air Source Heat Pumps: Over 14 SEER for less than 65,000BTUH systems; Over 11-10 EER for larger systems
Water-Source Heat Pumps: 14 EER
Ground Water-Source Heat Pumps: 16.2 EER
Ground-Coupled Heat Pumps: 14.1 EER
Air Cooled Chillers: 9.56 EER full load; 10.41 EER IPLV
Water Cooled Chillers: efficiency requirement varies based on size
Heat Pump Water Heaters: 3.0 COP min. efficiency
Energy recovery ventilation (ERV): min. 450 CFM (part of electric-powered system) ARI 1060 rating > 65% winter effectiveness
Fluorescent Lighting: Replacement or retrofit equipment only; complete, hard-wired or permanently mounted; HPT8 ballasts must be less than or equal to .78 BF; Exterior installations do not qualify
Window Film: Solar heat gain coefficient of 0.40 or less
Other standards apply; check program web site




















Program Administrator Dayton Power and Light
Website http://www.dpandl.com/bizprograms.php
Date added to DSIRE 2009-06-11
Last DSIRE Review 2012-07-30
Last Substantive Modification
to Summary by DSIRE
2012-02-01


References DSIRE[1]


Summary

Dayton Power and Light's (DP&L) non-residential electricity customers are eligible for energy efficient technology rebates. Rebates are available for energy efficiency measures added to an existing system when a customer retires usable electric-powered equipment and replaces it with a more efficient model. Customers must demonstrate permanency or sustainability of savings over the payback period. Equipment must exceed minimum federal and state mandated efficiency standards. Rebates will be paid within 30 days of an inspection of the system. Custom rebates are available to non-residential distribution customers and must meet a payback period between one and seven years. See the program web site for more information on eligibility and equipment requirements.


Incentive Contact

Contact Name Dayton Power and Light
Department Energy Efficiency Programs

Address 1900 Dryden Road

Place Dayton, Ohio
Zip/Postal Code 45439
Phone (800) 253-5801


Email EnergyEfficiency@dplinc.com
Website http://www.dpandl.com/bizprograms.php
     
     


















  • Incentive and policy data are reviewed and approved by the N.C. Solar Center's DSIRE project staff.[1]

References

  1. 1.0 1.1  "Database of State Incentives for Renewables and Efficiency (DSIRE)"