Chemical logging- a geothermal technique

Jump to: navigation, search


OpenEI Reference LibraryAdd to library

Conference Proceedings: Chemical logging- a geothermal technique

Abstract
Chemical logging studies conducted at the Department of Energy's Raft River Geothermal Test Site in south central Idaho resulted in the development of a technique to assist in geothermal well drilling and resource development. Calcium-alkalinity ratios plotted versus drill depth assisted in defining warm and hot water aquifers. Correlations between the calcium-alkalinity log and lithologic logs were used to determine aquifer types and detection of hot water zones 15 to 120 m before drill penetration. INEL-1 at the Idaho National Engineering Laboratory site in eastern Idaho represents the second area where this was applied. Calcium-alkalinity ratio, lithologic, and compensated neutron logs correlated well and were used to define the water-producing zones penetrated by the well. This well is located in an area of different geologic and hydrologic characteristics.

Authors 
Mcatee, R. E.; Allen and C. A.  








Published 
Geothermal Resource Council Transactions 1979, 1/1/1979





DOI 
Not Provided
Check for DOI availability: http://crossref.org



 

Citation

Mcatee, R. E.; Allen, C. A.  . 1/1/1979. Chemical logging- a geothermal technique. Proceedings of (!) ; (!) : Geothermal Resource Council Transactions 1979.


Related Geothermal Exploration Activities
Activities (1)


Areas (1)
  1. Raft River Geothermal Area
Regions (0)